Vertical Lambo Doors
by MATT BROOKS
How about something remarkable. Something never before experienced by most drivers. Something that makes waves. How about the butterfly effect?
Butterfly doors, also known as vertical door or lambo doors, originated to solve a problem. The Lamborghini had a very wide base, and a traditional door design would not allow for easy entering and exiting, especially if parked next to anything. They devised a door hinge system that lifts the doors vertically, and only slightly out war, clearing the door of the opening, and also allowing the wide body car to still fit in traditional spaces.
These doors catch a lot of attention. When door open vertically, you get the "butterfly" effect, making waves wherever you are. People stop and notice these types of modifications because they are rare, unique, and very appealing. These kits are now available for most cars, and come as a universal kit that can be fitted to almost any vehicle. Some of the kits will require a little body work, but others are a direct bolt in. The hinges, gas shocks, and hardware may not look like $750 to $1000 worth of materials, but the finished results is well worth the money for most car enthusiasts and tuners.
We suggest professional installation for these types of kits, mainly because in a lot of cases, the inner fender wells need to be rolled or modified to fit the new brackets and hinges. Most of the kits are adjustable enough to create a unique vertical opening while keeping it fairly easy to get in and out of the vehicle. Look for kits that allow for both vertical and horizontal adjustments to be made for the best possible combination of style and comfort.
Butterfly doors are becoming the craze at most tuner events and shows. Some cars look better than other with the mods done to them, and you can probably find images of your car model with them installed somewhere on the internet. I would suggest seeing a finished product before investing the money. The kits are in most cases completely reversible if you are unsatisfied for any reason, or intend to sell the car at a future date.
If you want to turn you ride into a real showstopper, these kits are the way to go. They come in manual and automatic varieties. Vertical doors are a great addition to any show car. Vertical Doors, Inc. is credited with the patent on the design we are most familiar with. There have been several company create similar products marketed under the product "type" called vertical doors. They are also referred to as butterfly doors, or 90 degree doors. Either way, they give our daily drivers a nice exotic sports car look.
There are some varieties of doors out there that will fit the bill if you are looking for that extra something to add to your show car. There are the traditional "vertical" doors which open vertically. See picture below. These kits use specially made brackets and gas shocks to open the doors outward slightly, then upwards. They can be adjusted to open further our before going up to make it easier to get in and out of, as a common disadvantage to the door kits is the increased difficulty of getting in and out of the vehicle.
There are other types of door modifications that can be done, such as "suicide" doors that open exactly the opposite of traditional doors. The hinges are moved to the other side of the door opening so it swings the other way. Also a cool upgrade.
Still my personal favorite is the Dalorian style door as seen in back to the future. These doors are hinged in the center of the roof, and raise straight up allowing for easy access in and out of the vehicle. This type of modification would call for some extensive mods to the roof system, as well as some fabricated doors, but it would make for a serious upgrade!
If you are interested in trying to install your own vertical door conversion kits, be warned, it can be tricky, but here is a guide to help you in the process.
1. Lift the hood and remove left and right shield of front wheel.
2. With the door open pull out the rubber hose connecting the door and the door frame, draw out and cut the wire (wrap the two ends of every cut wires with friction tape and record the given numbers. If the wires are long enough, it ��s not necessary to cut.) and then remove the rubber hose of the wires.
3. With door closed remove the factory top door hinge.
4. Test and draw the placement of the mechanism. Pay attention to the moving way of the swing arm and ensure the swing arm up to 90�� not to touch the shield or fender. So the mechanism must be in a proper height, which can be tested by the shield.
5. Grind the installation placement of the chassis or hammer any extrusions that may hinder the base plates from sitting flat. You may also grind and cut the base plate and door plate as needed.
B. After grinding the installation placement, test the proper distance with the shield and check and observe any places that may prevent the base plate and the swing arm from moving. In this situation you must draw a line around the base plate when it is in the proper, and then cut or hammer along the perimeter till not to hinder.
