Ensure Start
by EVANDER KLUM
The Volvo spark plug fulfils three basic functions to initiate the combustion process in a vehicle��s engine. Aside from sealing the combustion chamber, this component brings the electrical spark produced in the ignition coil into the combustion chamber. It also transmits the heat it picks up in the combustion process into the cooling system and to the cylinder head. In order to accomplish these varied functions, Volvo spark plugs must be aided by durable Volvo Spark Plug Wires. The Volvo Spark Plug Wire conducts the electrical spark that ignites the fuel inside the engine��s cylinders.
Unlike in the past, today's Volvo Spark Plug Wires are designed to perform more work. While this device is required to pass higher-current voltages more often, it must endure higher temperatures under the hood. To avoid upsetting delicate and complex electronic components nearby, Volvo Spark Plug Wires also must conduct electrical current with better insulation materials.
Due to these heavy functions, electrical failure is common to spark plug wires. Electrical failure is usually caused by loose connection at the ignition coil, distributor, or in the spark plug itself. This malfunction can also cause corrosion on the connectors. Usually, the loosening of the connection of spark plug wires is caused by normal engine vibration as well as by variation in the wire quality. Poor original routing, retainer failure, and the leakage of fluid which softens the spark plug wire are also causes of loosening. When these conditions exist, the wire must be replaced immediately. Its malfunction can cause severe damage on other components like the ignition coils or to the exhaust system components such as the oxygen sensor and catalytic converter.
Replacing the Volvo Spark Plug Wires should be part of a 30,000-mile tune-up. In replacing Volvo Spark Plug Wires, it is important to use only Volvo wires. There are cheap wires available in the market but they are most often made of inferior materials that are not guaranteed to last until another replacement interval. A slight variation in the proper installation process of Volvo Spark Plug Wires can impair its performance, so instructions must be carefully followed as with any other component. Even if the wires are numbered, they must not be taken out all at once. The removal and replacement of the Volvo Spark Plug Wires must be done one at a time. Improper installation may cause the vehicle to run badly or not to run at all; otherwise, Volvo ensures the proper start-up for every powerful drive.
